ACCURATE, SAFE AND ON-TIME DELIVERY
Which viscosity oil is better for welding generator 1kw
Dec 27,2022
It is recommended to use multi-grade engine oil. If multi-grade engine oil cannot be purchased, single-grade engine oil can be used instead of multi-grade engine oil. However, the use of single-stage lubricating oil will make the lubricating performance of the engine worse at the initial stage of starting and low load, the oil consumption will be higher, the viscosity will be too small, and the lubricating performance at high load will be worse.
When using synthetic or partially synthetic oils, it is recommended to use the same drain intervals as petroleum-based oils.
When using monograde oil, it must be ensured that the oil operates within the ambient temperature range shown in the table below. Development of sae viscosity grade ambient temperature 10w-26~-6~20w-10~20~304~32~4010~ and above <Synthetic engine oil is used in extreme environmental conditions where the ambient temperature can reach -45~c, in these extreme Under certain conditions, petroleum-based motor oil is not effective for diesel engines. Cummins engines recommend the use of synthetic or partially synthetic oils when the ambient temperature remains below -25 degrees Celsius. All motor oils must meet API Group III and SAE viscosity classification. Synthetic or partially synthetic oils must not be used during the break-in process of a new or overhauled engine. Use a standard petroleum based premium 15W/40 motor oil during the first oil change interval.
Prev —
Other blog
Contact us
Our mission doesn't end with a project coming into production, and our team strives to use our know-how to provide a lifetime of quality service to our customers
Address: ChengBei Development Zone, Hechuan District. ChongQing
